Porcelain is a long-lasting flooring option that doesn’t need a lot of sustenance to keep it looking fresh for decades. These tiles are commonly coupled with a glazed glass protective covering that renders them immune to stains, water leaks, and physical scratches. There are, nonetheless, approaches to pay special attention to during porcelain tile maintenance to yield the most satisfactory results. Keep your eyes peeled on this page!

Porcelain Tile Maintenance Basics To Know

Slay Stains and Scratches

While porcelain is stain-resistant to juice, wine, and coffee, it is essential to clean up spillage as soon as possible to avoid discoloration. Also, use a cutting board while preparing food, slicing sandwiches, or prepping other items with sharp tools on a porcelain surface. Non-abrasive cleaners and equipment should be used as well. Before cleaning, dust or vacuum the tile to eliminate any dirt.

All You Need to Know About Cleaning

  • Glazed Porcelain Tiles
  • Glazed porcelain tiles have a long-lasting, high-gloss finish generated by a high shine glaze baked onto the surface during the production process. Scuff marks aren’t any more likely on glazed tiles than compared to other materials, but they do surface more obviously on the shiny tiles. But your porcelain can stay spotless by using the correct equipment and trying to avoid marks from regular wear and tear.

    Sweep or clean your floors frequently to eliminate dirt that might ruin the glazing. To properly renew glazed floors, most mopping or cleaning processes may be utilized. You must, still, follow any directions specified on the product’s label. While these tiles are stain-resistant, if spills are allowed to sit for lengthy periods, they will begin to shade. To remove stains, mix vinegar with water in a 1:1 ratio or use a diluted chemical ceramic tile cleaner.

  • Unglazed Porcelain Floor Tiles
  • Unglazed porcelain tiles usually appear with repetitive patterns and no tone differences. It’s a durable yet porous material that can tarnish throughout time in its raw-produced condition. These materials must be handled with care through monitoring spills and applying a sealing treatment at least once a year.

    To start cleaning, use ordinary warm water or combine it with a few drops of mild ph-balanced dishwashing liquid. This type of flooring should not be soaked since they are highly susceptible to water penetration. After mopping, wipe the tiles dry. You will also want to keep the surface pores impermeable by applying an acrylic stone sealer to your unglazed surface.

    Another thing to pay attention to is the grout lines, for they are frequently the problematic part. Even if the tiles don’t need to be protected, the grouts would need to be. You may clean them with a little brush and a mixture of water and baking soda. Consider fully removing and rebuilding grout lines for a fresher look.

    Porcelain tiles provide a durable choice for your flooring or countertops. They’re not composed of the same materials as regular ceramic tiles due to the use of sand and feldspar. This results in a denser tile that is stronger and absorbs less dampness. Thus, the tile is more stain-resistant and simpler to keep clean. Unglazed and glazed porcelain tiles may be kept in good condition if you carefully maintain them using our upkeep basics as shown above.

    Previous Post

    Choosing The Right Tiles 101: 4 Things To Consider

    Next Post

    Porcelain Tiles Vs. Vinyl Plank: Which Is Better For Your Flooring?